Caldera de Fluido Término Bono OMV

Descripción

Especificaciones Técnicas:

 

• Marca: Bono
• Modelo: OMV
• Tipo: Acuotubular
• Presión de trabajo: 1 a 2,5 Bar
• Rango de Generación: 0,233 – 6,977 KGV/HR

Technical Strengths:

1. Large heated surfaces, sized according to the most conservative parameters, ensure extremely low superficial and volumetric thermal loads. Special attention is paid to the furnace sizing. In Oil-Matic heaters a low heat flux, as well as a small difference between the film temperature and the bulk temperature, lead to negligible fluid degradation.
2. A new coil design and the fluid turbulent flow guarantee excellent heat transfer conditions and the best temperature profile. This results in better fluid protection especially in severe heat conditions. High turbulence and velocity of fluid in the radiant section prevent the formation of stagnant areas that might lead to flash event and fluid degradation.
3. Different fluid-dynamic conditions are setup between the radiant and the convective sections of the furnace to ensure maximum heat transfer and fluid protection. The multicoil assures the gradual heating of the fluid and prevents undesirable thermal shocks between the inner and the outer coils.
4. Low hydraulic pressure losses allow for low energy consumption at the circulation pump and therefore lower operating costs. This feature plays an important role in the operation of the equipment, especially if compared to the capital cost of the investment.

More technical information http://www.autoflame.cl/wp-content/uploads/2017/05/CAT-OMV-NEW.pdf